![]() ![]() ![]() In RSLinx try using the Ethernet/IP driver (not the Ethernet driver) to see if it works. I am going to take a wild guess and say that if it worked before, then someone swapped out your SLC processor with an older processor. The wireshark capture here is interesting i guess. I have RSLinx running and we can see that every RSLinx communication (port 62304 to 2222) is successful and every BasicLabel communication (Dynamic port to 44818) is not successful. The original wireshark image was showing all traffic that involved the 10.60.48.215 IPAddress, the PLC. I opened up the AdvancedHMIv35 solution with a single BasicLabel (the one that's currently saying cannot connect and No response from Forward Open) and ran wireshark filtering for only the CIP protocol. ![]() There is mention of two IP addresses that are not mine I'm not entirely sure what they are but they continue to occur even when the BasicLabel app is not running so I assume they're unrelated. In the driver properties, reduce the CIPConnectionSize to 200. You can try adding "cip" in the filter to see only the traffic of it talking to the PLC The Wireshark screen capture isn't enough for me to diagnose the problem. I switched to the drivers to what i downloaded yesterday. The parent solution was labeled v35 so I think that's the one you are referring to. The version numbers actually decreased so maybe I've missed something: AdvancedHMIControls 3.9.9.24 AdvancedHMIDrivers 3.9.9.24 1.0.0.0 3.99.19.2 Never the less, the issue persists. I have not found success in reading anything from the PLC though, again, the. Hoping for some answers, to get a small step Forward.You would need to go to the AdvancedHMI forum to download the latest beta. so the question: How can I determine a sucessfull crack? Maybe I'm just not able to start the KEPServer. ![]() No sucess, I see no license confirmation. I tried also to install the "KEPServerEX-6.3.279.0" from this Forum, including the crack file "version.dll", which I copied to the program Directory. Has ANYBODY here some ideas, how to get the KEPServer on my virtual (copied) machine running? I played a bit with faking the MAC Addy from the NIC - without sucess. This means for me, the KEPServer knows some very specific details about the original machine (S/N from Motherboard, HDD, etc.?), which I can not reproduce in my virtaul machine. I want to virtualize my running machine - it works, everything is here, excepted the KEPServer - he ist doing troubles!Įntering the original Activation ID or the Emergency ID results in some error message like: "Request was sent from another machine". I understand the normal procedure to send a request an get back an activation file for a specific machine. I have a RUNNING KEPServer 6.3.279.0 with a valid license (Activation ID) I need some help - maybe somebody here is able to support me. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |